You are currently browsing the category archive for the ‘Studio Playing’ category.

Remember that Paul Leim video I posted a month ago? Here’s a few more vids in that same series from studio master Dan Needham. Anyone wanting to be a studio drummer needs to prioritize watching these 5 videos…

God bless Youtube and Vic Firth for making GOLD information like this available for anyone to learn, and God bless Dan Needham for being such a juggernaut player.

Jim Riley, the touring drummer for country artists Rascal Flatts, wrote a book a few years back on the mysterious “Nashville Number System” for writing song charts. He explains an example of this in a short article over at Woodshed Percussion. I’ve used my own version of song charts for many years, but Riley’s explanation is compelling. I might need to switch over to this… but the jury is still out. Here’s the excerpt that really got me:

2 reasons why I stopped writing simpler “drummer cheat sheets”:
1) I wrote the chart and used it but the keyboard player and guitarist also used the same chart.
2) What else are my options? If I write a chart that says “play 8 bars” then what am I doing? Counting bars…BUT, if I read a number chart then instead of counting bars I’m listening to changes…listening for me is a better option.

Wow. I’d never heard of until Chris McHugh posted it on the Facebooks just now. Streaming today is a video of a recent clinic Chris did in Nashville. Great stuff… but I have to say that I don’t really understand the tendency for drum clinics to revolve around watching the drummer play along with tracks. I’ve got a mountain of live show dvds for that. Personally, I’d much rather hear him speak more about his philosophy/approach, and the various things he’s learned through his experiences. He does some of that, but I can always go for more.

PS… note the video’s deft spellcheck on the “tuning” question…

Last week on my Tumblr I posted a photo from a session I did recently. The engineer at the session asked me to remove the reso head on my kick drum for the tracks, which I’ve noticed is becoming common. My well-spoken friend Seth Earnest sent me an email in response to the no reso head idea, and he brings a bunch of great insight to the topic. With his permission, I’ve posted the email he sent below. Get ready to learn something.

*NOTE: The audio examples referenced below are now posted on my Tumblr.

I do a lot of engineering and mixing, as well, so it’s funny as my skills are developing there how I find myself in a battle between my engineer hat and my drummer hat.

With my drum hat on, I almost always despise the sound of a kick without a reso head on it. It’s just attack-y with no bottom and sounds dull, right? Especially compared to a reso head with no “sound” hole. There’s nothing more awesome than a well-tuned, wide-open kick drum sound w/both heads w/no holes. It’s magnificent, and makes me feel like Keith Carlock or Bonham.

Putting that hat on the rack and sliding into my mixing hat is where the reso head/hole/no hole/no reso head really kicks into gear. It’s also full of many variables ranging from the song, the room, the bass player–both how he plays (busy/sparsely) and his tone (round, warm, lots of lows, edgy, lots of mids, clicky, rock-n’-roll, with a pick, w/o a pick, etc. etc. etc.)–and many others to avoid a land mine on down the road of the tune as the mix is being built.

What this brings me to is that the exact sound I hate as a drummer of no reso head becomes really tight & punchy through a mic in the control room and cuts through a mix well w/o a lot of twiddling on my part as the mix engineer. If I’m playing with a really round-playing bass player with a lot of subby stuff going on in his tone, I really want that kick to cut through and be the attack to the bass player’s bottom end. There’s only so much space in a mix for the low end, and to have two full-range sounds (booming kick and round bass) gets way too muddy for there to be any joy in that range. And that range is so crucial for a tune’s foundation.

If my kick is boomy, huge, round, awesome and full on the bottom end, my bass player will have to back off his lows and put more mids in his tone to cut through a mix and not muddy up the bottom end (see the “Grooves” audio example).

So, there’s a lot of “where do I want to end up” and working backwards that has to happen on the producer/mix engineer’s part. These days, a lot of producers are the engineers or mix engineers. So, either I as producer need to determine the final vision of the song and explain to my engineer, or I have to get the vision from whomever is producing to know where he’s going. If I know I’m going for a Roots-style low end on certain hip hop track, I know I’m going to want ridiculous warmth and roundness out of the bass and a nice “thump” (read lower mid-range) out of my kick to push the low end of mix through the song without it getting muddy.

Keep in mind I’m talking exclusively in the studio world right now. Live music is a whole other thing that I only understand from a musician’s perspective.

But, if I’m going for a tune with a Jaco-esque jazzy bass tone, I have all sorts of room in the low lows for my kick drum to serve as the foundation. I can slap a no-hole reso head on that kick, mic it from the outside so I get that huge boomy joy out of a great kick, and put the two together for a solid low end foundation.

All of THIS being said, I come back (long-windedly so) to the reso head off issue. It creates a kick sound with a nice thump, a nice attack and nice mid-range punch that tends to be easier to fit into a mix than a bigger-sounding kick drum. Wise engineers know where they’ll be headed come mix time and will go ahead and mic everything accordingly. It creates a much better mix time because if everything is engineered with the final product in mind, there’s a LOT less twiddling and bangin’ your head against the wall during the mix stage.

There are so many different styles of mixing, too, so each person may do it differently. I know you’re familiar with Mayer’s Continuum, and I listen to that record’s low end, and it’s freakin’ money at all points. This is an example of a genius set of players, producer (Jordan) and mix engineer (Michael Brauer) planning ahead and creating all of this subtle interplay between two of the best players in the world–Jordan and Palladino.

Steve Jordan has a relatively boomy kick on most of those tracks, but what’s really interesting are the holes our brains fill when dealing with sonic information. Listen to “Waiting on the World to Change.” Jordan starts out on his own with that sick groove, and his kick is boomy–def has a reso head on it–but it’s not getting into the sub area. That kick is centered around 100Hz or so, but it implies a much deeper set of frequencies, and then when the bass comes in, it’s sort of “around” that kick on either side, both lower (like 60-80Hz) and above it (200HZ or so), so each sound has it’s own little home. The kick sounds deeper when the bass comes in b/c they’re working together to round out the bottom, but the kick on its own is actually not as deep as we might perceive it to be if we heard that track soloed out without any other tracks in the mix.

On track 2 (“I Don’t Trust Myself”), it’s the same idea but with different frequencies. Jordan’s kick is up around 150Hz, and Pino has that huge low end (under 100) but also that mid-range attack for how he’s playing (esp. the slap thing he’s does every few bars) up in the 400-600 range.

Track 3 brings a different approach. That hot-rod loop starts, then the “real” drums kick in w/the rest of the band. The “real drums” kick drum is mostly an attack/punch sound, and the bass is low and round. Also, it’s interesting to note that after the band kicks in, the hot rod loop get a low-cut EQ on it (i.e. everything below around 200-250 is rolled off, I think); the kick drum on the hot rod loop has almost no legitimate low end once the “real” drums come in. BUT, most interestingly, our brains almost create the low end b/c low end is implied by the timbre of the kick drum itself.

It’s like thunder. If we only heard the upper frequencies of thunder (say, above 120Hz), we would still process it as a “boom” because its timbre implies and our brains process it as having all that low end, as well (see the “Thunder” audio example). It’s a subtle thing that if you really listen you realize there’s actually not the low end there, but the quick, instinctual perception of our brains becomes a god-send in a mix environment when you only have so much frequency real estate to deal with. You can imply something without it actually being there in a mix, and that will always leave room for something else.

Mixing, I’m learning through tedious trial-and-error, seems to be a series of compromises.

SOOOO, the reso-head-off for a lot of engineers can remove one set of land mines on down the road of “How in the world do I deal with this kick and bass interfering with each other?” A decision will have to be made one way or the other (kick gets the low-end or the bass does, but it can’t be both), and a wise engineer will make decisions early on which make his life easier as he goes.

I brought up Keith Carlock earlier: listen to his stuff on the Steely Dan records he is on. That is NOT his normal kick drum sound. He’s normally blasting some awesome-sounding, wide-open kick sound, but that would have muddied up a SD record, so he (or they or the producer) were like, “Nope. Tight and dry, Keith.” My taste is that the newest 2 SD records are too thin sounding, but that’s just my taste. So, there are a lot of taste issues, too. 

This is a ridiculously long answer for a simple question, but it’s one I’ve been thinking about a lot, too. I used to get offended when an engineer would ask me to take off my reso head, but I’m now beginning to learn a lot more of why he might be asking as I’m learning more about mixing.

My point in all of this is that an engineer will use tricks and aural brain assumptions (like the posted audio examples) to make a mix work, and, sometimes, they know that a reso-head full kick sound will impede where they are going in their vision of the mix.

On the other hand, some engineers are just lazy and don’t want to fully engage in the art of capturing your kick drum as it actually sounds and ask you to do stupid stuff because they don’t want to get off their butts and actually listen to what’s happening in the room. So there’s that whole ball of worm cans to deal with, too.

Wow. Can’t wait to see this.

HT: Adam Levy

Hey all. Lots going on in my life right now with gigging and what not. So in the stead of a lengthy rant of music philosophy, here’s a link to a free 2-track EP by Minneapolis singer-songwriter Brynne Andre.

This EP was recorded and produced by my friend Matt Patrick, who hired me to play drums. Brynne had the idea to release these songs for V-day only recently, so we tracked the tunes in a short session last Thursday, and Matt mixed them over the weekend.  People, that is the FASTEST turnaround for a studio project that I have ever heard of.  Good work, Matt.

So check out the tunes and happy Valentine’s Day.

PS. For the gear nerds, I used a new Mahogany RD kit I got last week which sounds incredible: 9×13 rack, 16×16 floor, 14×24 kick… reinforcement hoops, inner coating… the vintage works.  The snare on the first track is my old Black Beauty, and on the 2nd track it’s my new 8×15 Glo Kit snare tuned way down.  Cymbals are all Paiste Traditional: 16″ crash/hats, 20″ thin ride (left crash), 22″ medium light ride, 22″ light ride (right crash).

I’ve come across a pretty cool blog about music and the art of audio recording written by the extremely prolific engineer/producer Bobby Owsinski. The blog mainly features isolated tracks from famous records with commentary and analysis from Bobby, but he also recently reposted a Modern Drummer Magazine article from L.A. session drummer Brian MacLeod (you may remember my SIS interview with him).  MacLeod’s got some great insights on famous tracks he’s recorded, and Owsinski’s blog in general is a good site to spend some time browsing.

HT: Senior Wong

“Nashville producer and session drummer Dan Needham offers insight into the daily requirements, challenges, and rewards of life in the recording studio, sharing helpful tips on how to get started as a session player, what it takes to be successful, and how to deal with the demands of satisfying artists and producers.”

That’s the description from Artist House Music about this video on their website.  I just watched it and IT IS REALLY GREAT.  Any drummer who is seriously pursuing a career in the recording world should carve out 24 minutes to watch this video.

HT: Warnock

Here’s some footage of Nashville’s favorite Aussie drummer, Paul Mabury, tracking some stuff for Dave Barnes’ next record.  Note the use of the “heel-toe” technique on the hihat 16ths…

So I just picked up one of those new Flip camcorders. It is completely awesome. 8 gigs of HD footage = 2 hours of recording time. I tried it out yesterday at a session at Skyland Studio, and I’m really impressed.  It gets pretty good audio for something the size of my cell phone.

The session was for the new Miss Minnesota, but I forget her name right now.  She’s doing a record to raise money for a MN charitable organization of her choice.  I’m using the house DW kit at Skyland, which is always fun to play on. I also got a new ride a few weeks ago off Craigslist… a 21″ Paiste Dark Energy. This was the first studio run with that cymbal, and it is SO BOSS.  Much thanks to my new friend Dan Noraker for that one.

Blog Stats

  • 534,780 hits